MOT Test Overview And Its Relation With Car Tyres

The full form of the MOT test is the Ministry of Transport. This is a legal test in the UK. It means you cannot ignore this test. Many drivers do not consider the guidelines of car servicing because these guidelines have no legal importance. However, these guidelines are extremely important in terms of the performance and life of the vehicle.

If we talk about the MOT Coventry test, drivers cannot ignore the guidelines of this test. They have to submit their vehicles for the test every year. If the vehicle clears the test, the driver gets a certificate. This certificate is valid for one year. It means the driver has to submit their car for the test once again.

 DVSA does not send any reminders to the car drivers. However, your nearby garage cum MOT centre may send you a reminder about its services. You get a reminder or not but you have to take the test on the due date. It is also possible to take the test one month before the due date.

The MOT centre has a full list of components that the tester checks during the test. The tester would not change the condition of your vehicle. His duty includes only checking the vehicle for major, dangerous and minor faults.

Your car will fail its test if it has major or dangerous faults. Generally, cars with minor faults clear the test.

Tyres are vital for road safety and driving comfort. Moreover, only these components directly touch the road surface. Therefore, the tester must check the faults in your car tyres.

A lot of car drivers fail their test just because of faults in tyres.

We are sure you would not like to be one of those car drivers.

If you maintain your car tyres with a proper plan, you can avoid failures in the test just because of faults in your tyres.

You can take the following steps to improve the condition of your tyres before the test.

Visual Checkup:

Just go near your tyres and visually check their body.

You are in the safe zone if you do not observe signs like bulges, cracks, cuts and punctures.

These signs would not please the tester. The presence of cracks and cuts on the tyres is a clear indication that the tyres are not fit and fine from the inside. Bulges also indicate impact damage. Punctures are however repairable but you cannot repair the same area repeatedly.

It is better you replace your tyres after observing these signs.

Tread wear is also a danger sign. Bald tyres are risky for car drivers. They provide poor handling and gripping power on both dry and wet roads. Therefore, you would not keep your passengers and other road users safe if you drove your car on bald tyres. Moreover, the test is also going to observe tread wear in your tyres to declare the result. If the tread depth is below 1.6mm, your car will fail its test just because of illegal tread depth.

You have to replace your tyres because tread wear is not a repairable issue.

Check the Air Pressure:

Improper air pressure in your car tyres may lead to failure in the test. You do not need the help of a mechanic to check the air pressure in your tyres. Just take an air pressure gauge and check the inflation level. We are sure you would not like to have a retest just because of low air pressure.

Besides air pressure in tyres, you have to check the tyre pressure monitoring system as well.

A Tyre pressure monitoring system is an important part of road safety because it makes you alert in the case of a flat tyre or blowout.

Is the Age of Tyres a Considerable Factor?

There is not any rule for tyre age for private passenger cars. The tester is going to check only the physical condition of car tyres. Even new tyres may have signs like bulges and cuts on their sidewall. In this case, the test would not allow you to drive your car on the roads.

What are the Rules About Spare Tyres?

The test will check the tyres that are fitted to your car. The guidelines of the test do not include spare tyres. Generally, vehicles with a tyre repair kit do not need to have a spare tyre. Moreover, vehicles with run-flat tyres also do not require a spare.

 Is the Test Going to Check the Features of Car Tyres?

The tester will check the speed rating and loading limit of your tyres. They want all four tyres to have the same features. If the tester finds tyres with different features, they will not allow you to have the certificate.

As you see, there are many things in tyres that have a link with the Mot test. Therefore, you must check your tyres for mechanical issues before the test.